INTEX 2205FHD SOFTWARE DOWNLOAD

INTEX 2205FHD SOFTWARE DOWNLOAD

Hi, Friend’ welcome to electrowide.in .In this post, you will get Fully Tested Software of this model INTEX LED-2205 FHD for free. If you want to get upgrade software for the INTEX 2205FHD LED TV, this is the place to go. This firmware can be download from this platform. If you are looking to get and download the software of this motherboard this is the right platform for you.

On this platform, I will share all the LED LCD TV software and firmware, and flash files for free of cost. If you want to get any LED TV software on this platform just type the TV model number on the search box, which at the top right corner of this site.

If did not get your particular TV model software on the search box then requesting you to comment in the below comment box for getting the software of other models of LED LCD TV.

At your one request, I will upload your LED LCD TV model software as soon as possible.

For easily downloading software I again mention below this motherboard software downloading process.

The following issue of this INTEX 2205FHD:

  • blank screen
  • power indicator(RED) continuously glowing
  • Burn mode
  • Mirror
  • Remote issue
  • Auto Restart
  • AV/HDMI Input option hide
  • Mapping problem
  • Power indicator no any response
SPECIFICATION  OF THIS INEX 2205 FHD TV

Brand: Intex

Model number: LED-2205 FHD

MotherBoard Number: TP.VST59.PB753

Wi-Fi: Not available

Screen Type: LED

Display Size: 22inch

Resolution: 1920×1080

Speaker output: 8 watt

Features Format: Non-Smart

Power Requirement: AC100 to 240 volts ~50Hz/60Hz

Power consumption: 36 watt

VGA: Available

HDMI Port: 1 slot available

USB Port: Available

Service menu: Menu1147

How to update Software of INTEX 2205FHD TV

Friend’s, if you want to update INTEX 2205FHD Software then it is not difficult, you just need to follow some steps carefully to update or install the software easily on your Intex led tv board. please follow these steps to update the software successfully on your tv.

  1. Download The Software File and Extract it.
  2. From The Folder Copy/Cut The extracted file to the pen drive.
  3. Insert The Pen drive into tv (Make Sure The Power Plug is Unplug).
  4. After the plugin, the pen drive switches on your main ac plug.
  5. Now software upgrading starts.
  6. After finishing the software upgrading process. some setting options are displayed on the screen then you custom the setting on your choice.

BPL Remote works in this software

INTEX 2205 FHD FIRMWARE: Click Here

Disclaimer: Following given software link is USB and also programmer upgrade-able. Electrowide is not responsible for any type of damage and loss as a result of the upgrade and installing the software on your device.

Leave a Reply

Your email address will not be published.